HPE FlexNetwork MSR Series User Manual

356
Figure 736 ISDN line configuration page
Table 275 Configuration items
Item Description
Description Description of the ISDN line.
Comfortable Noise Function
Generate some comfortable background noise to replace the toneless
intervals during a conversation. If no comfortable noise is generated, the
toneless intervals will make both parties in conversation feel uncomfortable.
• Enable.
• Disable.
By default, the comfortable noise function is enabled.
Echo Cancellation Function
• Enable.
• Disable.
After enabling this function, you can set the echo duration, that is, the time
that elapses from when a user speaks to when he hears the echo.
Echo Duration
Nonlinear Function of Echo
Cancellation
• Enable.
• Disable.
Input Gain on the Voice
Interface
When the voice signals on the line
attenuate to a relatively great extent,
increase the input gain value.
IMPORTANT:
Gain adjustment might lead to
call failures. Hewlett Packard
Enterprise recommends not
adjusting the gain. If necessary,
do it with the guidance of
technical personnel.
Output Gain on the Voice
Interface
When a relatively small voice signal
power is needed on the output line,
increase the voice output gain value.
Companding Law
Configure a companding law used for quantizing signals.
• A-law, used in China, Europe, Africa, and South America.
• µ-law, used in USA.
IMPORTANT:
A BRI interface does not support this configuration item.

HPE FlexNetwork MSR Series Specifications

General

Brand	HPE
Model	FlexNetwork MSR Series
Category	Network Router
Language	English