4. Operation of SEP Related Controllers
242
[2] Basic operation
Set parameters.
[Parameter]
Touch [] to return to the previous screen.
Touch [] to move to the next screen.
Three screens are available, including one showing the default positioning band and others
used to edit position data and password.
Touch [Menu] to return to the parameter menu screen.
An example of setting a soft limit is explained.
Touch [] and [] on the displayed screen until the soft limit setting screen appears.
Touch the current value.
When the numeric keypad appears, enter a desired value
and then touch [ENT].
Change parameters and touch [Menu] to return to the
controller restart screen.
To Next Page
Loading...