4. Operation of SEP Related Controllers
251
[1] Basic operation
Language: Select a language to display.
Display for Japanese/English/Chinese languages setting change
Touch a desired language ([English] etc.).
Touch [Write].
(Note) If writing is not conducted, the setting will go back
to those
before making a change when moving to another
screen.
Sound: Set whether to output or not output a touch tone.
Touch [OFF]. A touch tone is not output.
Touch [MAX], [MID] or [MIN]. A touch tone is output.
Touch [Write].
(Note) If writing is not conducted, the setting will go back
to those
before making a change when moving to another
screen.
Auto Monitor: You can have the monitor screen appear first after the touch panel teaching
pendant is connected.
Touch [ON] to enable the auto monitor function.
Touch [OFF] to disable the auto monitor function.
Select either ON or OFF, and then touch [Write].
(Note) If writing is not conducted, the setting will go back
to those
before making a change when moving to another
screen.
Dim Display Time: Set the lights-out time when not being operated.
If “0 sec” is set, the display will remain lit at all times.
Touch [Dim Display Time (“0”: Never Dim) 30 sec].
Enter the light off time.
A desired value between 0 and 255 sec can be set.
Touch [Write].
(Note) If writing is not conducted, the setting will go back
to those
before making a change when moving to another
screen.
To Next Page
Loading...