4. Operation of SEP Related Controllers
252
Data Input Warning: The warning can be output when a value less than the minimum
speed and a value exceeding the rated acceleration/deceleration
speed are entered in the position data. Note that the value is entered
even if the warning occurs. Always use within the specification of the
actuator.
Touch [Effect] to give the warning.
Touch [Non Effect] not to give the warning.
Select either Effect or Non Effect, and then touch [Write].
(Note) If writing is not conducted, the setting will go back
to those before making a change when moving to
another screen.
[Display]
Adjustment of contrast and brightness of the screen, position tuning for touch panel and LCD
screen check can be performed.
Touch [Display].
Display menu Window is displayed.
Select Display Setting menu.
Touch [Menu] and the display returns to EnvironmetSet
screen.
To Next Page
Loading...