5. Operation of MEC Related Controllers
278
7) Ecology When Ecology is enabled, you can have the motor power (servo)
turned off automatically upon elapse of a specified period to save
power after completion of positioning. Set the applicable period
beforehand using a parameter.
Parameter
No.
Parameter name
Initial
value
Setting
ran
e
10
Auto servo OFF delay time
[sec]
1 0 to 9999
[Pushing toward the end point or intermediate point]
[Pushing toward the start point or intermediate point = Pulling]
Approach
Push complete
(A position complete
signal is output)
Speed
Push band
Start point Start position
of push
Time
End point
(intermediate point)
Return
Push complete
(A position complete
signal is output)
Speed
Time
Push band
End point Start position
of push
Start point
(intermediate point)
To Next Page
Loading...