5. Operation of MEC Related Controllers
292
5) Setting the energy-saving function (auto motor power (auto servo) OFF function)
An example of stopping at 2 points is explained.
How to automatically turn off the servo in 5.0 seconds after stopping is explained.
No. Operation Screen Remarks
1
Touch on the MEC menu
screen.
2 Set the auto motor power
(auto servo) OFF delay time.
Touch [Parameter].
3 If the system password is
other than “0000,” the
password input screen
appears.
Input a system password and
touch [ENT].
The default system password
is “5119”.
For how to change the
system password, refer to
5.11, “Maintenance –
Parameters [Change System
Password].”
4 Touch [Edit Parameter].
5
Touch []/[] to navigate
through the screens until the
auto servo OFF delay time
setting screen appears.
6 Touch the value field of auto
servo OFF delay time.
When the numeric keypad is
displayed, touch [5] and then
[ENT].
Change ax.
To Next Page
Loading...