IAI TB-02 - Page 305

5. Operation of MEC Related Controllers
293
No. Operation Screen Remarks
7 “5” is shown.
8 Touch [Menu].
9 Touch [Yes]. If you touch [No], the settings
you have made will not be
reflected until the controller is
restarted.
10
11 The controller is restarted and
the MEC menu screen
appears.
Touch [Pos.Edit].
12 If the position data edit
password is not “0000,” the
password entry screen
appears.
Enter the position data edit
password and touch [ENT].
A position data edit password
can be set in the “position
data edit password” field of
the parameter edit screen.
13 Set the energy-saving function
at the start point.
Touch [Forward Position].
Touch [Menu] to return to the
MEC menu screen.