6. Operation of ELECYLINDER
376
During the operation, the [Start] button and the step number
in execution turn to blue.
To stop operation, touch the [Start] button again.
Operation stops.
Touch the number to execute the program when it is
required to set number of repeating.
Set the number to repeat and touch [ENT].
Touch [Start] button to start operation.
The number of remaining for repeating is displayed, and
counts down as 100 → 99 → 98 → ….
Touch [Reset] button and the remained times go back to the
number of program execution times.
To Next Page
Loading...