IAI TB-02 - Page 407

8. Error Display
395
Code Messa
g
e Contents, occurrin
g
cases, and countermeasures
134 Controller Unsupport Function
The function number to which the controller does
not correspond in the user adjustment mode was
allocated.
Example:
If the adjustment number 6 "Load cell
calibration execution" is performed to the
model which does not support the load cell
function.
160 SDcard open error
File cannot open.
Example:
Backup was performed without SD card
inserted.
161 SDcard write error
SD card cannot be written.
Example:
Backup was performed under the following
conditions.
 Free space of the SD card is insufficient.
 SD card write-protect switch is engaged.
 File is set to the write prohibit property in
overwriting.

A
n unsupported SD card is inserted.
162 SDcard read error
SD card cannot be read.
Example:
If a SD card is not inserted or files cannot be
read, at the time of restorin
g
.
164 SDcard file format error
File format is not matched.
Example:
If the content of the file which will be restored
are different from the file format defined by data
t
y
pes.
180
A
xis No. Chan
g
e Complete
Messages to confirm the operation
(It is not to say any operation mistake or abnormal
occurrence)
181 Controller init Complete
182 Home chan
g
ed, All clear
183 IO-function chan
g
ed
184 Data transfer completed
185 LoadCell calibration completed
186 Time settin
g
completed
187
Brownout of RTC backup
battery
Voltage of the battery inside the teaching pendant
is reduced.
(Note)
Settings for time, languages, and touch operation
sound are initialized.
The message is displayed only in Japanese (the
default language).
Consult us about replacing the batter
y
.