Keysight Technologies C Series - Page 149

Keysight N9915-90020 User’s Guide 149
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
See Also
“Points ” on page 203
“Trace Display States (SA Mode)” on page 203
“Average Type” on page 204
“Average Count” on page 205
“Alignments” on page 206
“RF Burst Amplitude Alignment” on page 211
“Detection Method” on page 213
“Display Line” on page 214
“Noise Marker” on page 215
“Power Spectral Density (PSD) Function (SA Mode Only)” on page 216
“Logarithmic X-axis Interpolation (EMI and SA modes Only)” on page 217
“Band/Interval Power Marker” on page 217
“Frequency Counter at Marker” on page 218
“Audio Beep at Marker Power” on page 219
“Meas UNCAL Error” on page 220
“Old Data Indicator (*)” on page 220
“Radio Standards and Channel Measurements” on page 220
“Measurement Preset” on page 221
“Averaging” on page 221
“Traces” on page 222
“Channel Power (CHP)” on page 222
“How to Set Up EMF Settings (Requires EMF (Option 358), GPS (Option
307), and SA Mode (Option 233–Mixed Analyzers))” on page 230
“Spectrum Emission Mask (SEM) — (SA Mode Only)” on page 243
“IQ Analysis (SA Mode Only)” on page 250
“Effective Isotropic Radiated Power (EIRP) – (SA Mode Only)” on page 253
Interference Analyzer:
“Spectrogram Display (SA Option)” on page 536
“Waterfall Display” on page 540