164 Keysight N9915-90020 User’s Guide
SA (Spectrum Analyzer) Mode (Option 233–Mixed Analyzers)FUTURE
SA Mode Settings
— Cable Off – Opens a softkey menu to enable/disable a cable and edit,
save, create a new cable description table, recall, and set a storage
device location.
—
More – Opens a softkey menu to View Corrections and set the
Amplitude Correction type for your antenna.
Learn more, see “Selecting and Viewing Corrections” on page 164.
—
More – Edit/Recall an Antenna file to be used to transmit.
—
RcvrSide Antenna Off / On Edit/Recall an Antenna file to be used to
receive.
— SrcSide Cable Off / On Edit/Recall a Cable file to be used on the
Source side.
— RcvrSide Cable Off / On Edit/Recall a Cable file to be used on the
Receiver side.
Selecting and Viewing Corrections
1. Press Scale/Amptd
> More > Corrections > More
2. View Corrections ON OFF Turn ON and OFF Pink Trace - Antenna/Cable
corrections. This is a composite of all cable/antenna corrections that are
currently applied. Available as a useful visual aid, the zero “dB” level (no
net correction) is mapped to appear at the -50 dBm on-screen level.
3.
Amp Corr Select [Triaxial XYZ] - then choose one of the following:
— Default Receiver side only antenna measurements.
—
Src/Rcvr Split to work with non-triaxial receiver and source side
antenna measurements.
— Triaxial XYZ (default, when Channel Power is on and when a
compatible triaxial antenna’s factors have been imported) for
measuring channel measurements and EMF.
4. <Back
To return to previous softkey menu.
How to Use the Antenna Softkeys
The following menu appears when any of the above softkeys are pressed:
— Antenna ON OFF or Cable ON OFF – Turn correction ON or OFF for this
Antenna/Cable.
— Edit Antenna or Edit Cable– Edit an Antenna/Cable Correction table. See
Using the Antenna/Cable Editor (below) for more information.
— New – Create a new Antenna/Cable. See Using the Antenna/Cable Editor
(below) for more information.
To Next Page
Loading...
