Keysight Technologies C Series - Page 324

324 Keysight N9915-90020 User’s Guide
Electromagnetic Interference (EMI) Measurements – Option 361
In this Chapter
The following outline of this chapter is separated into two main sections:
—
“EMI Measurements” and
—
“Chapter Overview of EMI Measurements”
EMI Measurements
“Using EMI Measurements (Option 361)” on page 327
“EMI Measurements Mode Settings” on page 328
— “How to select EMI Measurements Mode” on page 328
— “Scale and Units” on page 330
— “CISPR (International Special Committee on Radio Interference)
Control” on page 331
— “Resolution Bandwidth (Res BW)” on page 336
— “Single / Continuous / Restart” on page 337
— “Points” on page 338
— “Trace Display States (EMI Mode)” on page 338
— “Detection Method” on page 340
— “Input – (Trace Input for APD Measurements)” on page 341
“About Electromagnetic Interference (EMI) Measurements” on page 343
— “EMI Measurement Features (Option 361)” on page 343
“How to Set Up Electromagnetic Interference (EMI) Mode Settings” on
page 345
— “EMI Measurement Mode Setup Procedure” on page 345
“Glossary (EMI)” on page 346