326 Keysight N9915-90020 User’s Guide
Electromagnetic Interference (EMI) Measurements – Option 361
See Also
— “EMI Measurement Mode Setup Procedure” on page 335 – see
“EMI
Measurements” on page 324
“Glossary (EMI)” on page 337 – see “EMI Measurements” on page 324
Other Features Available – Refer to Chapter 9, “SA (Spectrum Analyzer)
Mode (Option 233–Mixed Analyzers)FUTURE”
and Chapter 30, “Data
Analysis Features”
:
— Alignments (SA) – “Alignments” on page 206
— Attenuation Control (SA) – “Attenuation Control” on page 161
— External Gain (SA) – “External Gain” on page 160
— Field Strength Corrections (SA) – “How to select and edit corrections
for Field Strength measurements” on page 163
— Preamp Control (SA) – “Preamplifier Control (Opt 235)” on page 162
— Source Tracking Offset and Offset Reversal (SA) – “Source Tracking
Offset and Offset Reversal” on page 169
.
—
Independent Source/Tracking Generator (SA) –
“Independent
Source/Tracking Generator ” on page 186
— Logarithmic X-axis Interpolation (EMI and SA modes Only) –
“Logarithmic X-axis Interpolation (EMI and SA modes Only)” on
page 217
— Scale Settings (SA and Data Analysis) – “Scale and Units” on page 159
and
“All about Scale Settings” on page 762
Optional Settings:
“All about Markers” on page 734
“All about Limit Lines” on page 749
“Saving and Recalling Files” on page 818
“Why and When to Calibrate” on page 126
“Using the Antenna/Cable Editor” on page 165
Chapter 31, “System Settings.”
(Changing display colors)
Chapter 33, “File Management.”
To Next Page
Loading...
