Keysight Technologies C Series - Page 405

Keysight N9915-90020 User’s Guide 405
Over–the–Air Measurements (OTA) – LTE FDD Option 370, LTE TDD Option 371, 5G TF
Option 377, 5G NR / 5G NR EVM Conducted Option 378
How to Set Up EMF Mode Settings (Requires EMF (Option 358) and 5G NR (Option
378))
ii. Press Freq/Dist > Center > 3.5 GHz then
iii. Press
Freq Span > 120 GHz then
iv. Press System
> Utilities > EMF Antennas > Antenna Axis
[Auto] – (default == Auto) then
v. Press
X to view the X axis
vi. Press
Y to view the Y axis and
vii.Press
Z to view the Z axis
6. Verify EMF in 5G NR Mode:
a. Press Mode
> OTA > 5G NR then
b. Press Meas Setup 4
> More > EMF > dBuV/m
(i.e., For this example. Other units are selectable.)
For more information:
— Refer to
Figure 13-31 on page 405.
— See also
“GNSS (GPS+) and GPS” on page 795.
Figure 13-31 Example Summing of Triaxial Values