512 Keysight N9915-90020 User’s Guide
Indoor and Outdoor Mapping – Option 352 (Requires Spectrum Analyzer Mode (Option
233), and GPS Receiver (Option 307))
How to Use Data Logging (Option 352)
—Press Scale /Amptd > More > Unit then choose:
— dBmV, dBuV, W, V, A, dBmA, or dbuA (Default Units: dBm)
See
Figure 16-22 on page 512.
Figure 16-22 Field Strength Annotation that can be Recorded and Played Back
If Data Logging or playback is not occurring when you think it should,
check the following:
— Is the sweep in
HOLD? (upper-left annotation), or check the Sweep menu
for Continuous set to OFF.
— Is Recording or Playback Paused? (mid-left annotation)
— Is the Data Logging measurement Interval set too long? (Configuration
settings.)
To Next Page
Loading...
