Keysight Technologies C Series - Page 655

Keysight N9915-90020 User’s Guide 653
Channel Scanner (Option 312)
How to Set Up Channel Scanner
Figure 28-4 Custom List Table Settings
3. Press Done
4. Press Save Recall List > Save List to save a custom list. See also “How to
use the FieldFox labeler ” on page 820
.
Step 2: Select Display Type
Select one of the following display orientations:
— Select
Display Type—choose:
— Bar ChartV or
— Bar ChartH or
— Channel Pow or
—Strip Chart or
—Chart Overlay or
—Scan&Listen
Press Recall List to bring back a previously stored custom list