Korg microARRANGER - Page 126

124
Program operating mode
AMS (Alternate Modulation Source) list
+/0 The sign of the  “Ramp Low” setting will
determine the direction of its effect.
“RampHigh”willhavenoAMSeffect.
JS +Y & AT/2 (Joy Stick +Y & After Touch/2)
The effect will be  controlled by the joystick +Y (verti‐
cally upward) and by after touch data (received via

MIDI).Inthiscase,theeffectofaftertouchwillbeonly
halfofthespecifiedintensity.
JS –Y & AT/2 (Joy Stick –Y & After Touch/2)
The effect will be  controlled by the joystick –Y (verti‐
callydownwa rd)andbyaft
ertouchdata(receivedvia
MIDI).Inthiscase,theeffectofaftertouchwillbeonly
halfofthespecifiedintensity.
Note Number
Amp
Key Low
Key High
AMS = Amp KTrk +/+
AMS Intensity = positive (+) value
Ramp Low
= +50
Ramp High
= +50
Depth and direction of modulation
zero
+ max
- max
example of Amp
Keyboard Track settings
AMS = Amp KTrk +/–
AMS Intensity = positive (+) value
Depth and direction of modulation
zero
+ max
- max
AMS = Amp KTrk 0/+
AMS Intensity = positive (+) value
Depth and direction of modulation
zero
+ max
- max
AMS = Amp KTrk +/0
AMS Intensity = positive (+) value
Depth and direction of modulation
zero
+ max
- max