49
Style Play operating mode
Page 20 - Style controls: Drum/Fill
Note value for the Trill, Repeat or Echo Ensemble
options.ThisisinsyncwiththeMetronomeTempo.
Feedback
Note:ThisparameteronlyappearswhentheEchooptionis
selected.
Thisparametersetshowmanytimestheoriginalnote/
chordisre
peatedbytheEchooption.
PAGE 20 - STYLE CONTROLS: DRUM/FILL
Inthispageyoucanselectvariousgeneralparameters
fortheStyle.
V1–V4 Drum Map
The Drum Mapping lets you select an alternative
arrangementofpercussiveinstrumentsforthe selected
Drum Kit, without any additional programming. Just
select a Drum Map, and some percussive instruments
willbereplacedwithdifferentinstruments.
0…7 DrumMapnumber.Number0isthestan‐
dardmapping.
Kick D(esignation)
The Kick Designation replaces the original Kick (Bass
Drum)soundwith a different Kick of the same Drum
Kit.
Off,1…3 Kickreplacingtheoriginalone.Of
fcorre‐
spondstotheoriginalKick.
Snare D(esignation)
The Snare Designation replaces the original Snare
Drumsound witha differentSnareofthe same Drum
Kit.
Off,1…3 Snarereplacingtheoriginalone.Offcorre‐
spondstotheorig
inalSnare.
Fill1/2
These parameters set a Var
iation to be automatically
selectedattheendoftheFill.
Off ThesameVariatio
n,playingbeforeselect‐
ingaFill,willbeselectedaga
in.
1&2…3&4 The specified Variations will be al
terna‐
tively selected. For example, with the
“1&2”option,V
ariation1andVariation2
willbealternativelyselectedaftertheend
oftheFill.
Up/Down The next higher/lower numbered Va
ria‐
tionisselected,incycle.AfterVariat
ion4,
an Up command will select Variation 1.
After Variation 1, a Down command will
selectVariation4.
Inc/Dec The ne
xt higher/lower numbered Va
ria‐
tion is selected. When Variation 4 is
reached,
anInccommandwillselectVari‐
ation4again.WhenVariation1isreached,
a
Dec command will select Variation 1
again.
‐>1…‐>4 “FilltoVariation”(‐>1,‐>2,‐>3,‐>4)au
to‐
matically selects one of the four available
StyleVa
riationsattheendofthefill.
PAGE 21 - STYLE CONTROLS:
WRAP AROUND / KEYBOARD RANGE
Inthispageyou can programtheWrapAroundfunc‐
tionandtheKeyboardRangefortheStyletracks.
Hereistheeditproc
edur
e:
1. UsetheVOLUME/VALUE(A–H)buttonstoselect
apa
rameter.
2. Use the F‐1–F‐4 buttons to move the cursor
betweentheparameterandit
sstatusorvalue.
3. Use the TEMPO/VA LUE controls to change the
parameter’sstatusorval
ue.
Prog (Program)
This parameter lets you select a different Program,
other than the one recorded into the Style Element
(Variations,Fills,Intros,Endings).
Note: This parameter is automatically set to On each time
youassignaPr
ogramtoanyoftheStyletracks,eitherfrom
thefrontpanelorviaMIDI.
Original Style tracks always use the orig
inal Pro‐
grams. If you assign a different Program
toaStyletr
ack,itmayberesettotheorig‐
inal one when selecting a differ
ent Style
Element.
On YoucanassigndifferentProgramstoeach
Style track, and sa
ve them in a Perfor‐
manceorStylePerformance.Thisbecome
s
the only track’s Program for all Style Ele‐
ments.
To Next Page
Loading...
Need help?
General
