110
Program operating mode
Page 4 - Pitch LFO1
Pitch modulation
AMS (Alternate Modulation Source)
This parameter selects the source that will modulate
thepitchoftheselectedoscillator.See“A M S (Alternate
Modulation
Source)list”onpage123.
Intensity
Thisparameterspecifiesthedepthanddirectionof the
effectproducedby“AMS”.Withasettingof0,nomod‐
ulation will be applied. With a setting of 12.
00, the
pitchwillchangeuptooneoctave.
Forexample,ifyouset“A M S ” toJoystick +Yandpush
thejoystick,thepitchwillriseifthisparameterissettoa
positive(+)value,orfallifthisparameterissettoaneg‐
ative(–
)value.Therangeis
amaximumofoneoctave.
‐12.00…+12.00
Parametervalue.
Pitch EG modulation
EG Intensity
Thisparameterspecifiesthedepthanddirectionof the
modulation that the pitch EG specified on “Page 6‐
Pitch EG” will apply to the pitch. With a setting of
12
.00,thepitchwillchangeamaximumof±1octave.
‐12.00…+12.00
Paramet
ervalue.
EG AMS (EG Alternate Modulation Source)
This parameter selects the source that will modulate
thepitchEGoftheselectedoscillator.See“A M S (Alter‐
nateModulationSource)list”onpage12
3).
Intensity (AMS Intensity)
This parameter specifies the depth and direction of the
effect that “A M S ” will have. For example, if you set
“A M S ” toVelocityandsetthisvalueto+12.00,theveloc‐
itywi
llcontroltherangeofpitchchangeprod
ucedbythe
pitchEGinarangeof±1octave.Asyouplaymoresoftly,
thepitchchangewilldrawclosertothepitchEGlevels.
Note: “Intensity” (Pitch EG) and AMS will be added to
determine the depth and direction of the pitch modulation
appliedbythepitchEG.
Portamento
Portamento
This parameter turns the portamento effect (smooth
changeinpitch from one notetothe next) on/off,and
specifieshowitwillbeapplied.
Note:PortamentowillalsobeswitchedwhenCC#65(Porta‐
mentoSW)isre
ceived
.
On Portamentowillbeapplied.
Off Portamentowillno
tbeapplied.
Portamento Time
This parameter sets the portamento time. Increasing
thevaluewillproduceaslowerchangeinpitch.
000…127 PortamentotimeinMIDIvalue.
PAGE 4 - PITCH LFO1
InthispageyoucansettheLFO1modulationparame‐
tersfortheselectedoscillator.
Selected
Usethisparametertoselectanoscillatortoputinedit.
Alternatively,youcanselectoscillatorsusingtheF‐1–F‐
4buttons.
Intensity
This parameter specifies the depth and direction of the
pitchmodulationappliedbytheLFO1settingsyoumade
on“Page17‐LFO1”.Withasettingof12.00,amaximum
of±1octave ofpi
tchmodulation will be applied. Nega‐
tive(–)valueswillinverttheLFOwave
form.
‐12.00…+12.00
Intensitydepthanddirection.
JS+Y (JoyStick +Y)
Thisparameterspecifiesthedepthanddirectionofthe
effectthatjoystickmovementinthe+Ydirection(away
from yourself) will have on the pitch modulation
appliedbytheLFO1.
Asthisvalueisincreased,movingthejoystickinthe+Y
dir
ectionwillcausethe LFO1toproduce deeperpitch
modulation. With a setting of 12.00 a maximum of ±1
octaveofpitchmodulationwillbeapplied.Negative(–
)valueswillinverttheLFOwaveform.
‐12.00…+12.00
Joystickactionde
pth.
Pitch LFO1 ‘Level’ modulation
AMS (Alternate Modulation Source)
This parameter selects the source that will control the
depthofpitchmodulationproducedbytheLFO1.See
“A M S (AlternateModulati
onSource)list”onpage123.
Intensity
Thisparameter specifies the depth and direction of the
effectthat“AMS”willhave.Withasettingof0,modula‐
tionwillnotbeapplied.Withasettingof12.00,the
LFO1
willapplyamaximumof±1octaveofpitchmodulation.
Negative(–)settingswillinverttheLFOwaveform.
Forexampleif “A M S ” issettoJoystick+Yandpushthe
joystick,apositive(+)settingofthisparameterwillcause
thepitchmodulationcreatedbyLFO1tobeappliedwith
the normal phase, and a negative (–) setting will cause
theLFOtobeappliedwithinvertedphase.
Pitch change (level)
Softly played
(Intensity (Pitch EG) setting)
Strongly played with a
negative (–) value
Strongly played with
a positive (+) value
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
To Next Page
Loading...
Need help?
General
