206
048: AutoPan Dly
(Stereo Auto Panning Delay)
This stereo delay effect pans the delay sound left and
rightusingtheLFO.
049: LCR BPM Dly
The L/C/R delay enables you tomatch the delay time
with the song tempo. You can also synchronize the
delay time with the arpeggiator or sequencer. If you
program the tempo before performance, you can
achievea delayeffectthat synchronizeswiththesong
inreal‐time.Delaytimeissetbynotes.
Note:Wi
thextremevalue
s,thesyncmaybelost.
a
L Delay Time [msec]
Sets the delay time for the left channel
0.0...680.0msec
L Feedback
Sets the feedback amount for the left channel
–100...+100
b
R Delay Time [msec]
Sets the delay time for the right channel
0.0...680.0msec
R Feedback
Sets the feedback amount for the right channel
–100...+100
c
High Damp [%]
Sets the damping amount in the high range
0...100%
Fx:043
Low Damp [%]
Sets the damping amount in the low range
0...100%
Fx:043
d
LFO Waveform
Selects LFO Waveform
Triangle, Sine
LFO Shape –100...+100
Determines how much the LFO waveform is changed Fx:020
e
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right Fx:034
f
Panning Frequency [Hz]
Sets the panning speed
0.02...20.00Hz
g
Panning Depth
Sets the panning width
0...100
Src Off...Tempo
Selects the modulation source for the panning width
Amt
Set the modulation amount of the panning width
–100...+100
h
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
Delay
Delay
High Damp Low Damp
High Damp
Low Damp
Feedback
a
BPM
Selects MIDI Clock and assigns tempo
MIDI, 40...240
,
b
L Delay Base Note
Selects the type of notes to specify the delay time for TapL
,
Times x1...x16
Sets the number of notes to specify the delay time for TapL
Level
Sets the output level of TapL
0...50
c
C Delay Base Note
Selects the type of notes to specify the delay time for TapC
,
Times x1...x16
Sets the number of notes to specify the delay time for TapC
Level
Sets the output level of TapC
0...50
d
R Delay Base Note
Selects the type of notes to specify the delay time for TapR
,
Times x1...x16
Sets the number of notes to specify the delay time for TapR
Level
Sets the output level of TapR
0...50
e
Feedback (C Delay)
Sets the feedback amount of TapC
–100...+100
Src Off...Tempo
Selects the modulation source for the TapC feedback
Amt –100...+100
Sets the modulation amount of the TapC feedback
f
High Damp [%]
Sets the damping amount in the high range
0...100%
Fx:043
Low Damp [%]
Sets the damping amount in the low range
0...100%
Fx:043
g
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level Fx:037,
Src
Selects the modulation source for the input level
Off...Tempo
Fx:037
h
Spread 0...50
Sets the width of the stereo image of the effect sound Fx:043
i
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp
Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Base Note x Times
To Next Page
Loading...
Need help?
General
