72
Song Play operating mode
The Write window
100 Even‐numbered axis are totally moved
overthefollowingodd‐numberedaxis.
Window
Areaofquantizeintervention,borderingthegridaxis.
0The quantize window corresponds to the
axis.Noquantizationhappens.
100 T
hequantizewindowex
tendstothenear‐
estwindow;alleventsarequant
ized.
THE WRITE WINDOW
You can save onto the internal memory a Seq1+Seq2
Setup. There is a separate Setup for each of the two
onboardsequencers.
This Setup memorizes the Internal FX settings, the
Inte
rnal/External status of each track, and the Play/
Mutestatusofeachtrack.WhenanewSongisselected,
the saved Setup is automatically recalled, and all
parametersarereset.
•GloballysettingtheInternalFXparametersallows
you, for exam
ple, to assign to all Songs a Reverb
suitable for the venue where you are performing,
without havingtomodifyany of the Songs. (This
istrueonlyfornon‐microARRANGER/80Songs).
•Globallyse
ttingtheInternal/Externalstatus
allows
you, for example, to send the Piano track of all
Songs to a dedicated expander (ju st set globally
thePianotracktotheExternalmode).
•ThePlay/Mutestatusallowsyoutoglobal
lymute
tracksthatyoudon’t wantto playduringa show,
forexamplethemelodytrack.(Thisistureonlyfor
non‐microARRANGER/80Songs).
For more information on the Inter
nal FX settings for
theSongPlaymode,see“Page3‐Mixer:FXsendA/B”
or “Page 3‐Mixer: FX send C/D”, and following, on
page76.
Here is the procedure to save the Seq1+Seq2 Setup in
memory.
1. Pr
essWRITE.TheWrit
epageappears.
2. PressENTERtoconfirm,orEXITtoabort.
Ifyouconfirm,theSetu
pissavedintotheG
lobal.
Youmaythensavethis Setuponthecardtogether
withtheGlobaldata.
To Next Page
Loading...
