196
“Depth”=100, “Envelope Amount”=–100
034: Auto-Pan
(Stereo Auto Pan)
ThisAutoPaneffectpanssoundbetweenleftan
dright.
It is stereo, and shifting the left and right LFO phases
fromeachotherwillsimulatethesoun doftheleftand
right channels crossing over each other by turns, or
chasingeachother.
a: LFO Shape
You can change the panning curve by modifying the LFO
waveform.
b: LFO Phase
This parameter determines the difference in the left and right
LFO phases. When you change
the value gradually from 0,
the sound from the left and right channels will chase each
other around. If you set the parameter to +180 or –180, the
sound from each channel will cross over each other.
You need to input different sounds to each channel in order
for this p
arameter to be effective.
a
LFO Waveform
Selects LFO Waveform
Triangle, Sine
LFO Shape –100...+100
Determines how much the LFO waveform is changed
b
LFO Phase [degree] –180...+180
Sets the LFO phase difference between the left and right
c
LFO Frequency [Hz] 0.02...20.00Hz
Sets the LFO speed Fx:009,
Src
Selects the modulation source of LFO speed
Off...Tempo
Amt –20.00...+20.00Hz
Sets the modulation amount of LFO speed
d
BPM/MIDI Sync Off, On
Switches between using the frequency of the LFO speed and using the
tempo an
d notes Fx:009,
BPM
Selects MIDI Clock and assigns tempo
MIDI, 40...240
Fx:009
Base Note
Selects the type of notes that specify the LFO speed Fx:009
Times x1...x16
Sets the number of notes that specify the LFO speed Fx:009
Level
Louder
Time
Shimmer
LFO Frequency[Hz]=8.0
Envelope Amount[Hz]= –7.0Hz
Depth=100
Envelope Amount= –100
Dry Envelope
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Phase
LFO Shape
Pan
Pan
LFO: Tri / Sin
Depth
e
Depth
Sets the depth of LFO modulation
0...100
Src Off...Tempo
Selects the modulation source of the depth of modulation
Amt
Sets the modulation amount of the depth of modula-
tion
–100...+100
f
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 175
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 175
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 175
–100...+100
L-In
Left
Center
Right
Output Stereo Image
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
L-In
R-In
LFO Phase = 0 degrees
LFO Phase = 90 degrees
LFO Phase = 180 degrees
Stereo Auto Pan - LFO Phase
To Next Page
Loading...
Need help?
General
