9/29/09 A-55
number is an alternate form of the
Find command.
Brackets in the syntax indicate
optional characters and operands.
<cr> = carriage return; <lf> = line
feed
Types of History
Each history is assigned a number
(history_number) so that it can be
identified explicitly with the
Advance, Backup, and Find
commands and is shown below.
Denoted in syntax by
history_number:
1=Exceedance (E)
2=Interval (I)
3=Daily (D)
4=Run Log (L)
5=Calibration (C)
6=Time (H)
7=Histogram Table (T)
Advance
Advance a number of records from
present record number. If no
num_record (number of records) is
provided, 1 is assumed.
Syntax Response
A[dvance][num_record][, history_number] <cr><lf>
Example: A
Example: A5
Example: A9,5
Advance current history 1 record
Advance current history 5 records
Advances calibration history by 9 records
To Next Page
Loading...
Need help?
General
