1-14 824 Reference Manual 9/29/09
calculates all of the desired data based on the sampled data
(sample rate of 48-51.2 kHz).
Getting Started
This section outlines the steps to unpack the System 824.
The following topics are covered:
• Unpacking and Inspection
• Accessories and Optional Equipment
• Connecting Internal or External Power
• Environmental Considerations
You will then be ready to use the System 824 for actual
measurements.
Unpacking and Inspection
Your System 824 has been shipped in protective packaging.
Please verify the package contains the items listed below.
Retain the packaging for safe shipment for calibration
service. Report any damage or shortage immediately to
Larson Davis, Inc. at (801) 375-0177.
If you have not already done so, please record the purchase
date, the model and serial numbers for your instrument, pre-
amplifier and microphone in the spaces provided on the
copyright page near the beginning of this manual. You will
find the instrument’s Model/Serial numbers printed on the
label on the instrument’s back panel. The microphone’s
Model/Serial numbers are located on the inside ring of the
microphone. The pre-amplifier’s Model/Serial numbers are
engraved the outside surface. You may be asked to provide
this information during any future communications with
Larson Davis, Inc.
To Next Page
Loading...
Need help?
General
