A-80 824 Reference Manual 9/29/09
Keyboard Simulation
The keys on the 824’s keyboard may
be simulated with the ‘K’ I/O
command.
Each key is given an ASCII
character as shown in the table
below.
A space delimiter following the ‘K’
is required before non-numeric
operands. (i.e. K ;6<)
The keyboard buffer will hold up to
8 keys. (K12345678 is acceptable).
&F101 Read macro &F variables 1 through 8
&F102 Recall a FILE into active memory
&F103 Store the current data (in active memory) to a
FILE
ASCII Charac-
ter: Key that is simulated:
0
CHECK KEY
1
POWER KEY
2
RESET KEY
3
PAUSE KEY
4
RUN/STOP KEY
5
UP ARROW
6
DOWN ARROW
To Next Page
Loading...
