A-8 824 Reference Manual 9/29/09
Commands
The commands are a series of ASCII
characters with an alpha command
and one or two numeric operands
followed by a carriage return, ASCII
13. The commands may be spelled
out though only the first character is
significant. i.e. READ 123 may be
abbreviated to R123. Every
command has a response to
acknowledge that it was received
correctly and to provide data
requested. For high reliability
systems there is an error-checking
protocol that will ensure proper
command data transferal. See “Error
Checking Protocol”.
Commands will be discussed
according to the following list:
Commands Symbol
Mode Commands M
Read Commands R
Settings Commands S
History Oriented Commands E, I, D, L, C, H, T
Print Commands P
Error Messages & Warnings Commands
Modem Control Commands
Miscellaneous Commands (unsupported)
Key Simulation Commands K
To Next Page
Loading...
Need help?
General
