Larson Davis 824 User Manual

9/29/09 Printing a Report 8-7
Step 5 Press the P Print key to bring up the Print menu.
For your report to print properly,
your printer must be connected as
described in "Connecting the 824 to
a Serial Printer" on page 8-1 and
configured as described in "Printing
Reports" on page 8-2.
Step 6 Using the
uand darrow keys highlight the
Tailored item, then select it using the
rarrow
key or the
c Check key and your “Tailored”
report will begin printing.
NOTE: Make sure you save your Instru-
ment ID before you change to a different
Instrument ID, otherwise all your newly
defined tailored print settings will be
lost.
Using the Recall Format (SSA and LOG instruments only)
The Recall Format menu allows you to customize the Sum-
mary report or the Tai lored report and gives you two more
customized reports called All, Long and All, Short. When
the summary report is recalled, the Customize menu is
changed to reflect those parameters which will be printed in
the summary and tailored reports.
The Customize menu is formatted with all of the parameters
for each report selected in the Recall Format menu. You can
choose to print the default parameters that are recalled for
each report or you can go into the Customize menu and
make further changes to the parameters.
Before beginning to Print, always recall the file and select
the data that you would like to print. The following shows
how to print from the Recall Format:

Larson Davis 824 Specifications

General

Brand	Larson Davis
Model	824
Category	Measuring Instruments
Language	English