9/29/09 System 824 Views 5-29
End date/time - Date and time the current/overall
measurement ended (or current time if still running).
Current/Overall SLM Display-c
(Min/Max)
The Current/Overall-c SLM or Min/Max display consists of
three major components:
• Display label
• Current/Overall Lmax reading
• Current/Overall Lmin reading
The SLM Current-c or Min/Max display is shown below:
The following explains each of the display’s components:
Display label - This shows the current display (for example,
“SLM Current-c”). The display represents both Current and
Overall-c display.
Current / Overall Lmax reading - Displays Lmax or
maximum level that occurred, and the date and time when it
occurred.
Current / Overall Lmin reading - Displays Lmin or
minimum level that occurred, and the date and time when it
occurred.
Current/Overall SLM Display-d
(Peaks)
The Current / Overall-d SLM or Peaks Display consists of
three major components:
• Display label
Display label
Current/Overall
Current/Overall
Lmax reading
Lmin reading
To Next Page
Loading...
