A-30 824 Reference Manual 9/29/09
Where n is from 1 to 8, indicating
the macro position and var_no is the
number of the “R” variable
associated with the position. Use a
var_no of “0” to define the last
position when less than eight are
desired.
After programming this group read
list, the response to G0 is 59.5, 38.6,
102.2; the SPL, L
min
and L
max
.
Setting Commands
The Settings select what functions
are enabled and determine how the
measurements are performed.
Settings can be both set (S) and
queried (Q). The setting numbers
provided below in the “Setting List”
section are for both the Set (S) and
Query (Q) commands.
• Option e.g. [Sun|Mon|Tues…|Sat]
• Numeric e.g. (123.45)
• Character e.g. (Gas Flare, Test 1); can be up to 30 char-
acters
• Template e.g. (hh:mm:ss)
To Next Page
Loading...
