7-4 824 Reference Manual 9/29/09
Step 5 Using the uord keys, highlight the SLM
option and press the
c Check key.
Step 6 Use the
uor dkeys to highlight the Detec-
tor setting, then press the
rkey or the c
Check key. The Detector Settings menu appears:
Step 7 In the pop-up windows use the
uor dkeys
to highlight the Fast setting, then press the
c
Check key to accept the setting change. The
SLM&RTA (SSA) instrument’s Detector setting is
now set to Fast. Press the
S Setup key to close
the menu and return to the SLM+RTA view.
Settings Descriptions
Within the Edit Settings menu, use
the
u and d keys to move
from one setting to the next. Use
the
rkey or c Check key to
select the setting to be modified. The
l key is used to return to
previous menus.
Descriptions of the System 824 instrument’s various settings
are provided in this section. The following will be covered:
• “Common SLM Settings”
• “Common Control Settings”
• “Logging SLM TWA Settings”
• “Logging SLM Triggering Settings”
• “LOG and SSA Ln Settings”
To Next Page
Loading...
Need help?
General
