A-10 824 Reference Manual 9/29/09
“Read” Commands (Reads out data variables)
The various read commands are
detailed in the following tables. The
tables list the variable number, the
variable name, a description, data
format, and instrument types for
which it is valid. Some of the Read
commands also utilize a second
operand.
M 9,1 Enable High Resolution Levels (nnn.nn for all sound level data (to I/O channel))
M 10 Lock 824 (leaves 824’s power on)
M 11 Lock 824 and Power Off (cease sending further commands)
M 12 Disconnect Modem (terminate connection and hang up)
M 13 Extend Modem Connect Time-out (can be set up to 255 seconds and allows time for
modem diagnostics)
M1000 Test RAM (non-destructive walking bit test; data left intact)
M1001 Test RAM (destructive pattern fill & test, setup recalled from EEPROM)
M2222 Store current setup to EEPROM (Response (“Stored!”) takes ~20 seconds)
@ Enable I/O Error Check Scheme (documentation available on request. S205,0F or 2
to 3 <CR> in a row will disable Error Checking)
Syntax Instru-
ment
Type
Description Response
R 1 All Device manf. and model (30 characters) String
To Next Page
Loading...
