Larson Davis 824 User Manual

9/29/09 A-33
Responses are denoted by (x) if Yes/
No or (n) if numerical.
Ln Query Commands (SSA)
Entering Settings
Option Settings
Settings are entered with the Set
command. The syntax for the Set
command is S[ET ]setting_number,
setting_value or S[ET
]setting_number;option_text where
setting_number is the setting
number, setting_value is the desired
setting, and option_text is the textual
setting for the option settings (those
that have one setting from a list of
possible settings).
Commands Instru-
ment
Type
Description Comments
Q 63 SSA Ln 1 Percent nn.nn
Q 64 SSA Ln 2 Percent nn.nn
Q 65 SSA Ln 3 Percent nn.nn
Q 66 SSA Ln 4 Percent nn.nn
Q 67 SSA Ln 5 Percent nn.nn
Q 68 SSA Ln 6 Percent nn.nn
Q 139 SSA Enable Lns [No/Yes]
Q 224 SSA Start Level nn

Larson Davis 824 Specifications

General

Brand	Larson Davis
Model	824
Category	Measuring Instruments
Language	English