9/29/09 System 824 Views 5-49
The following explains each of the display’s components:
Display label - This shows the current display (for example,
“Interval-d”).
Interval Number- The Interval Number display shows each
measurement interval in the order that it occurred. The
Interval Number indicates the order of the displayed interval
in relation to the other interval records.
SPL Exceedances - SPL Exceedances shows how many
times during this interval that the instrument’s SPL
Exceedance Level was surpassed.
Peak-I Exceedances - Peak-I Exceedances shows how
many times during this interval that the instrument’s Peak - I
Exceedance Level was surpassed.
Peak-II Exceedances - Peak-II Exceedances shows how
many times during this interval that the instrument’s Peak-II
Exceedance Level was surpassed.
Overloads - This shows how many overloads occurred
during this interval.
Intervals-e Display The Interval-e display consists of three major components:
• Display label
• Interval Number
• Ln Centiles Readings
The Interval-e display is shown below (LOG instrument
only):
To Next Page
Loading...
