9/29/09 A-81
Operation Notes
When using the Logic Input line in
the ‘LEVEL’ mode both I/O and
keyboard Runs and Stops are
inhibited. If the line is High the 824
takes data and if the line is Low no
data is taken. The ‘Pause’ mode will
pause the data taking process while
the line is high; this may be triggered
by high wind speed. In the ‘Toggle’
mode when the Logic Input line goes
high the 824 toggles between RUN
and STOP modes.
7
LEFT ARROW
8
RIGHT ARROW
9
FUNCTION KEY #1 (VIEW)
:
FUNCTION KEY #2 (DATA)
;
FUNCTION KEY #3 (SETUP)
<
FUNCTION KEY #4 (TOOLS)
=
FUNCTION KEY #5 (PRINT)
To Next Page
Loading...
