5-30 824 Reference Manual 9/29/09
• Current / Overall Flat Weighted Peak
• Current / Overall C - Weighted Peak
• Current / Overall A - Weighted Peak
The SLM Current -d or Peaks display is shown below:
The following information explains each of the display’s
components:
Display label - Shows the display currently being used (for
example, “SLM Current-d”). The display represents both
Current-d and Overall-d display.
Current/Overall Flat Weighted Peak reading - Shows the
flat weighted value from the System 824’s peak detector
along with the date and time that the peak event occurred.
Current/Overall C - Weighted Peak reading - Shows the
C weighted value from the System 824’s peak detector along
with the date and time that the peak event occurred.
Current/Overall A - Weighted Peak reading - Shows the
A weighted value from the System 824’s peak detector along
with the date and time that the peak event occurred.
Current/Overall SLM Display-e
(TWA)
The Current/Overall-e SLM display consists of four major
components:
• Display label
• TWA indicator and level
Display label
Flat Weighted Peak
C - Weighted Peak
A - Weighted Peak
To Next Page
Loading...
Need help?
General
