Larson Davis 824 - Saving Setups to Disk Files; Opening Setup Disk Files

10-12 824 Reference Manual 9/29/09
Saving Setups to Disk Files
Once you have created or modified a setup, you can store the
setup to a file. Select the Save Setup to a File menu item
from the File menu or click on the Save to File button on the
tool bar.
NOTE: The system setup is
automatically updated each time the 824
Utility is connected to the 824.
The 824 Utility program will bring up a standard windows
save dialog box, where the file name and location of the
setup can be specified.
The System setup can be modified and stored back into the
824, but cannot be saved to a disk file.
Opening Setup Disk Files
To open a setup disk file select the Open Setup File menu
item from the File menu or click on the Open File button on
the tool bar.