9/29/09 System 824 Views 5-19
Run Log See page 6-41 for a description of the Run Log display.
Ln Centiles To access the Ln displays, press the View
V key, use the
d key to cursor down and highlight “Ln Centiles”.
Press the right
rarrow key to view the Ln displays. The
following menu will appear:
Spectral Lns are enabled by the
“Spectral Ln” setting. These data
and displays are only available when
set to “Overall”. See the section
"LOG and SSA Ln Settings" on page
7-20.
Highlight “Broadband” and press the check
c key to view
the SSA-Ln-a display.
Display label
Percentile values & levels
To Next Page
Loading...
