9/29/09 Using ID Setting Files 7-3
If you have not already saved your
data, you will be prompted to save it
at this step.
Step 2 Select SLM&RTA SSA from the menu by using
the
u or dkeys and then pressing the c
Check key. The SLM+RTA screen appears:
The System 824 is now set to the SLM&RTA (SSA)
instrument.
Step 3 To access the Settings menu, press the
S Setup
key. The Edit Settings: SLM&RTA SSA is high-
lighted as the Setup menu appears:
Step 4 Press the
rkey and the Settings menu for the
SLM&RTA (SSA) instrument appears:
To Next Page
Loading...
