MacDon M155 2022 - Adjusting Reel Speed Without Indexing; Draper Speed

215676 293 Revision A
Adjusting Reel Speed without Indexing
The Operator can set their preferred reel speed without using the windrower’s indexing system by using the reel speed
controls on the ground speed lever (GSL).
1000787
A
B
C
D
E
Figure 4.295: Operator Console
A - Display B - Header Index C - Reel Fast
D - Reel Slow E - Display Selector
DANGER
Ensure that all bystanders have cleared the area.
1. Set HEADER INDEX (B) to OFF.
2. Press REEL FAST button (C) or REEL SLOW button (D) on the ground speed lever (GSL) until CDM (A) displays the
message ##.## REEL MPH. Adjust the reel speed value until your preferred setting appears.
22
4.6.6 Draper Speed
The speed at which the header’s draper belts turn can be controlled from the windrower’s cab. The draper speed can be
set to run independently, or relative to the ground speed of the windrower by taking advantage of the windrower’s header
indexing function.
For information on the recommended draper speed settings, refer to your header operator’s manual.
OPERATION
22. The reel speed can also be displayed in km/h or rpm, depending on the CDM’s display settings.