215676 464 Revision A
7.4 Transport
Several kits are available which facilitate moving the header from field to field.
7.4.1 Lighting and Marking for Cab-Forward Road Travel
This kit makes the windrower compliant with vehicle lighting regulations when the windrower is traveling on public roads
while in cab-forward mode. This kit includes red tail lights, slow moving vehicle (SMV) markings, hardware, and installation
instructions.
MD #B5412
Instruction MD #169426 is included in the bundle.
7.4.2 Towing Harness
The towing harness is used together with the weight box (refer to 7.4.3 Weight Box, page 464) when towing a
D Series Draper Header equipped with slow speed transport option behind the windrower.
MD #B5280 – Weight box harness only. Includes hitch pin and wiring for use with slow speed header transport option.
Instruction MD #169278 is included in the bundle.
7.4.3 Weight Box
A weight box installed onto the windrower header lift system is required to transport a header behind the windrower.
MD #B5238 – Weight box without harness
A towing harness is required to use the weight box. Refer to 7.4.2 Towing Harness, page 464 for more information.
OPTIONS AND ATTACHMENTS
To Next Page
Loading...
