Summary of Changes
At MacDon, we’re continuously making improvements; occasionally these improvements impact product documentation.
The following list provides an account of major changes from the previous version of this document.
Section
Summary of Change
Internal Use
Only
3.10.3 Climate Controls, page 54 Removed redundant Refrigerant Oil subtopic.
Technical
Publications
3.16 Engine Controls and Gauges, page
62
Removed DEF and regeneration system information.
Technical
Publications
3.17 Windrower Controls, page 63
Added callout (E) reference. Clarified instructions.
Technical
Publications
3.18 Header Controls, page 65 Added cross-reference to the Operations chapter.
Technical
Publications
3.19.2 Header Functions, page 71
Added cross-reference to the Operations chapter. Clarified
instructions.
Technical
Publications
3.19 Cab Display Module, page 70
Many topics in this section have had their titles changed
to conform with style guide requirements or to more
accurately describe the topic’s contents.
Technical
Publications
Engine-Forward, Engine Running, page 73
Revised ROAD GEAR (upper line) entry. Clarified all
entries.
Technical
Publications
Engine Oil Pressure, page 164
Added IMPORTANT.
Technical
Publications
Cab Display Module Voltage Display, page
165
Added explanation of the table. Added caption to the
table.
Technical
Publications
Converting from Transport Mode to Field
Operation, page 182
Removed redundant “lower the header down onto the
transport wheels” step in center-link disconnect
procedure; the header was already lowered in Step 10.
Removed final “shut down the engine” step.
Technical
Publications
Attaching Header in Transport Mode to
Windrower, page 184
Revised title for accuracy.
Technical
Publications
Adjusting Float Using Drawbolts, page
196
Added cross-reference.
Technical
Publications
4.4.11 Double Windrow Attachment, page
212
Added topics.
ECN 57956
Adjusting Reel Speed without Indexing,
page 293
Removed note. Revised title.
Technical
Publications
4.6.7 Knife Speeds, page 297
Moved explanatory content above table. Revised table
caption. Added statement referring to table.
Technical
Publications
Adjusting Reel Speed, page 303
Removed note. Revised title.
Technical
Publications
Setting Disc Speed, page 308 Added step describing how to set the disc speed.
Technical
Publications
5.1 Maintenance Schedule/Record, page
311
Moved topic to beginning of Maintenance chapter.
Removed Maintenance Schedule topic. Added
information from Maintenance Schedule topic to this
topic. Added coolant change at 2000 hours
recommendation.
Technical
Publications
5.5 Windrower Lubrication, page 324
Added cross reference to Safety chapter.
Technical
Publications
215676 iv Revision A
To Next Page
Loading...
