215676 451 Revision A
6.4 Header Drive Troubleshooting
Refer to the table provided below if you encounter problems with the header drive while operating the windrower.
Problem Solution Reference
Symptom: Header drive not engaging
HEADER DRIVE switch in cab not
engaged
Engage HEADER DRIVE switch.
Engaging and Disengaging
Header, page 201
Operator presence switch not closed
or faulty
Occupy operator’s seat or replace switch.
Contact your Dealer.
Contact Dealer
Appropriate solenoid not being
energized by activating switch
Contact Dealer. Contact Dealer
Symptom: Header drive lacks power
Relief valve setting too low
Contact Dealer. Contact Dealer
Hydraulic couplers/unions not properly
connected
Ensure hoses are connected correctly and
hose couplers/unions are tight.
Refer to the header operator’s
manual.
Header drive overload
Reduce ground speed.
—
Symptom: Warning alarm sounds
Header drive overload
Reduce ground speed.
—
Relief valve setting too low
Contact Dealer. Contact Dealer
TROUBLESHOOTING
To Next Page
Loading...
