AIR BAG SYSTEM
T–130–1
T
T–130
BODY ELECTRICAL SYSTEM
3. Disconnect the curtain air bag module connector.
4. Connect the SST (Adapter harness) to the curtain
air bag module.
5. Connect the SST (Deployment tool) to the SST
(Adapter harness).
6. Connect the red clip of the SST (Deployment tool)
to the positive battery terminal and the black clip
to the negative battery terminal.
7. Verify that the red light on the SST (Deployment
tool) is illuminated.
8. Make sure all persons are standing at least 6 m
{20 ft} from the vehicle.
End Of Sie
AIR BAG SYSTEM
A6E8130W012
A6E8130W051
To Next Page
Loading...
