Mitsubishi Electric MELSEC iQ-R Series - Page 1451

15 NETWORK COMMON INSTRUCTIONS
1449
15
Target networks and target station types
The network common instructions can access networks not only in the own station but also in other stations. (Excluding the
RIRD and RIRW instructions)
The following table lists the target stations of individual instructions.
*1 These instructions can access the following personal computer interface boards having the SEND/RECV functions.
CC-Link IE Field Network interface board, CC-Link IE Controller Network interface board, MELSECNET/H interface board, and
MELSECNET/10 interface board
*2 These instructions cannot be executed from the local station to the intelligent device station. Execute them in the master station.
Instruction symbol Target station (another station)
Target network Target station type
READ
SREAD
• Ethernet
• CC-Link IE Controller Network
• CC-Link IE Field Network
• MELSECNET/H
• MELSECNET/10
• RCPU
•QCPU
•LCPU
• QSCPU
•QnACPU
• Intelligent device station
WRITE
SWRITE
• Ethernet
• CC-Link IE Controller Network
• CC-Link IE Field Network
• MELSECNET/H
• MELSECNET/10
• RCPU
•QCPU
•LCPU
•QnACPU
• Intelligent device station
SEND
RECV
RECVS
• Ethernet
• CC-Link IE Controller Network
• CC-Link IE Field Network
• MELSECNET/H
• MELSECNET/10
• RCPU
•QCPU
•LCPU
•QnACPU
• Interface board for personal computer
*1
J(P).ZNRD
J(P).ZNWR
• Ethernet
• CC-Link IE Controller Network
• MELSECNET/H
• MELSECNET/10
•QCPU
•LCPU
•QnACPU
•ACPU
REQ • Ethernet
• CC-Link IE Controller Network
• CC-Link IE Field Network
• MELSECNET/H
• MELSECNET/10
• RCPU
•QCPU
•LCPU
• QSCPU
•QnACPU
• Ethernet adapter module
RIRD
RIWT
• CC-Link IE Controller Network
• CC-Link IE Field Network
*2
• CC-Link IE Controller Network device
• CC-Link IE Field Network device