Mitsubishi Electric MELSEC iQ-R Series - Page 1575

16 ETHERNET INSTRUCTIONS
16.6 Clearing Error Information
1573
16
Processing details
• These instructions clear following error information with regard to the module specified by (U).
*1 Only 0001H to 0010H can be specified when the network type is Q-compatible Ethernet.
*2 The error log can be cleared only when the network type is Q-compatible Ethernet.
*3 The initial error can be cleared only when the network type is Ethernet.
Operation error
Target name Clear target
specification
(s)+2
Clear function
specification
(s)+3
Specify the error
information to clear.
Buffer memory address
Network type:
Ethernet
Network type: Q-
compatible
Ethernet
Initial error 0000H 0000H Initial error code 1900025 105
Open error 0001H to 0080H
*1
0000H Open error code of
connection
The open error code of
connection No. 1 to 128
(0001H to 0080H) is
cleared.
100 to 163, 2000100
to 2000163
124, 134, 144, 154,
164, 174, 184, 194,
22564, 22574, 22584,
22594, 22604, 22614,
22624, 22634
Error log
*2
0100H FFFFH Error log  227 to 372
Communication
status (PORT1)
Status by
protocol
0101H FFFFH PORT1 communication
status by protocol
5000 to 5188 376 to 511
Communication
status
(PORT2)
*3
Status by
protocol
8101H FFFFH PORT2 communication
status by protocol
2005000 to 2005188 
All error information FFFFH FFFFH All the information above is
cleared.

Error code
((s)+1)
Description
C000H to CFFFH  MELSEC iQ-R Ethernet User's Manual (Application)