Mitsubishi Electric MELSEC iQ-R Series - Page 1636

1634
18 CC-LINK IE FIELD NETWORK INSTRUCTIONS
18.7 Setting Parameters
• The following figure shows how the G(P).CCPASET instruction operates when completing its execution.
Operation error
• When completed successfully
• When completed with an error
Error code
((s1)+0)
Description
D000H to DFFFH  MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
END0END0END0END0END0
OFF
OFF OFF
OFF
ON
ON
OFF
CCPASET
Sequence scan
Start contact
CPU module on
the own station
CC-Link IE Field
Network master/
local module
Completion device (d)
Completion status
indication device (d)+1
Parameter setting
1 scan
END0END0END0END0END0
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
OFF
CCPASET
1 scan
Error code
Sequence scan
Start contact
Completion device (d)
Completion status
indication device (d)+1
Completion status (s1)
Parameter setting error
CC-Link IE Field
Network master/
local module
CPU module on
the own station