Mitsubishi GOT2000 Series Connection Manual

5. ETHERNET CONNECTION
5.1 Connectable Model List
5 - 3
5
ETHERNET CONNECTION
(Continued to next page)
*1 If the A series Ethernet module is applied to the QnACPU, the GOT can monitor the devices as the same as the case of AnACPU.
However, the following devices cannot be monitored.
• Devices added to QnACPU
• Latch relays (L) and step relays (S)
(In case of QnACPU, the latch relay (L) and step relay (S) are different from the internal relay. However, whichever is specified,
an access is made to the internal relay.)
• File register (R)
*2 Combination with the Ethernet module is restricted. 5.1.2 Ethernet module
Series Model name Clock Communication type Connectable model Refer to
MELSEC-QS QS001CPU Ethernet
5.2.1
MELSEC-L
L02CPU
L06CPU
L26CPU
L26CPU-BT
L02CPU-P
L06CPU-P
L26CPU-P
L26CPU-PBT
L02SCPU
L02SCPU-P
Ethernet
5.2.2
5.2.1
MELSEC-Q
(A mode)
Q02CPU-A
*2
Q02HCPU-A
*2
Q06HCPU-A
*2
Ethernet
5.2.1
MELSEC-QnA
(QnACPU)
Q2ACPU
*2
Q2ACPU-S1
*2
Q3ACPU
*2
Q4ACPU
*2
Q4ARCPU
*2
Ethernet
*1
5.2.1
MELSEC-QnA
(QnASCPU)
Q2ASCPU
Q2ASCPU-S1
Q2ASHCPU
Q2ASHCPU-S1
Ethernet
*1
5.2.1
MELSEC-A
(AnCPU)
A2UCPU
A2UCPU-S1
A3UCPU
A4UCPU
A2ACPU
A2ACPUP21
A2ACPUR21
A2ACPU-S1
A2ACPUP21-S1
A2ACPUR21-S1
A3ACPU
A3ACPUP21
A3ACPUR21
A1NCPU
A1NCPUP21
A1NCPUR21
A2NCPU
A2NCPUP21
A2NCPUR21
A2NCPU-S1
A2NCPUP21-S1
A2NCPUR21-S1
A3NCPU
A3NCPUP21
A3NCPUR21
Ethernet
5.2.1

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive