19. MULTI-CHANNEL FUNCTION
19.3 GOT Side Settings
19 - 25
19
MULTI-CHANNEL FUNCTION
19.3.6 Items to be checked before starting drawing
The following describes that should be understood before starting drawing and the functions that should be set
beforehand when using the multi-channel function.
Device settings
It is necessary to set the device to be used together with the CH No.
GT Designer3 (GOT2000) Help
Accessible range for monitoring
The accessible range for monitoring is not changed even when the multi-channel function is used.
3. ACCESS RANGE FOR MONITORING
Click the device setting button. Click the controller to be set. Set the device.
FXCPU
Accessible range
is not changed.
FXCPU