Mitsubishi GOT2000 Series Connection Manual

9 - 2
9. MELSECNET/H CONNECTION (PLC TO PLC NETWORK), MELSECNET/10 CONNECTION (PLC TO
PLC NETWORK)
9. MELSECNET/H CONNECTION (PLC
TO PLC NETWORK), MELSECNET/10
CONNECTION (PLC TO PLC
NETWORK)
9.1 Connectable Model List
POINTPOINTPOINT
(1) Connectable network
For MELSECNET/H connection, use the MNET/H mode or MNET/H extension mode with MELSECNET/H.
Connect the GOT to the following network systems as an ordinary station.
• MELSECNET/H network system (PLC to PLC network) optical loop system
• MELSECNET/H network system (PLC to PLC network) coaxial bus system
The GOT cannot be connected to the remote I/O network.
For MELSECNET/10 connection, use the MNET/10 mode with MELSECNET/H.
• MELSECNET/10 network system (PLC to PLC network) optical loop system
• MELSECNET/10 network system (PLC to PLC network) coaxial bus system
The GOT cannot be connected to the remote I/O network.
(2) MELSECNET/H network module
When connecting the MELSECNET/H network module to the MELSECNET/H network system, specify the
MELSECNET/H Mode or the MELSECNET/H Extended Mode as a network type.
When connecting the MELSECNET/H network module to the MELSECNET/10 network system, specify the
MNET/10 mode as a network type.

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive