Mitsubishi GOT2000 Series Connection Manual

5 - 6
5. ETHERNET CONNECTION
5.1 Connectable Model List
5.1.2 Ethernet module
*1 If the A series Ethernet module is applied to the QnACPU, the GOT can monitor the devices as the same as the case of AnACPU.
However, the following devices cannot be monitored.
• Devices added to QnACPU
• Latch relays (L) and step relays (S)
(In case of QnACPU, the latch relay (L) and step relay (S) are different from the internal relay. However, whichever is specified,
an access is made to the internal relay.)
• File register (R)
*2 Use B or a later function version of Ethernet module and PLC CPU.
CPU series
Ethernet module
*1
MELSEC-Q (Q mode)
MELSEC-QS
Motion controller CPU (Q Series)
CNC C70
Robot controller (CRnQ-700)
QJ71E71-100 QJ71E71-B5 QJ71E71-B2 QJ71E71
MELSEC-QnA
AJ71QE71N3-T
*2
AJ71QE71N-B5
*2
AJ71QE71N-B2
*2
AJ71QE71N-T
*2
AJ71QE71N-B5T
*2
AJ71QE71 AJ71QE71-B5 A1SJ71QE71N3-T
*2
A1SJ71QE71N-B5
*2
A1SJ71QE71N-B2
*2
A1SJ71QE71N-T
*2
A1SJ71QE71N-B5T
*2
A1SJ71QE71-B5 A1SJ71QE71-B2
MELSEC-Q (A mode)
MELSEC-A
Motion Controller CPU (A Series)
AJ71E71N3-T AJ71E71N-B5 AJ71E71N-B2 AJ71E71N-T
AJ71E71N-B5T AJ71E71-S3 A1SJ71E71N3-T A1SJ71E71N-B5
A1SJ71E71N-B2 A1SJ71E71N-T A1SJ71E71N-B5T A1SJ71E71-B5-S3
A1SJ71E71-B2-S3
MELSEC-FX FX
3U-ENET-L FX3U-ENET-ADP
CC-Link IE Field Network Ethernet adapter module NZ2GF-ETB
MELSEC-L LJ71E71-100

Mitsubishi GOT2000 Series Specifications

General

Power Supply	24VDC
Software	GT Works3
Processor	RISC CPU
Interface	Ethernet, USB, RS-232, RS-422/485
Operating Temperature	0°C to 50°C
Display Type	TFT LCD
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% (non-condensing)
Shock Resistance	147 m/s² (15G), 11ms duration
Touch Panel	Analog Resistive